ALL AQUADYNE PRODUCTS

Aquadyne 1000 - Model .30B Filtration system is excellently suited to filter ponds and other aquatic habitats up to 1000 gallons. The Model AD1000 comes standard with an Air Backwash system that performs just like the larger Aquadyne systems except in a small footprint package for smaller water features and ponds.

The Air Assist Backwash aggressively agitates the debris collected in the media bed and suspends it in the water column which is easily backwashed to waste, conserving water, and deep cleaning the filter media bed. The AD1000 is very suitable for an excellent indoor large volume aquarium filter. This unit is also an excellent starter for small laboratory research applications.

• Supports up to 30 pounds of fish.
• .30 Cubic feet of bead media (11 lbs)
• Dimensions: 14"D x 33"H
• Average water to backwash 15 gallons.
• Pump Size: 500 - 3,000 gph.
• Compatible with the Dyna-Max Air Assist option.
• 1-1/2" unions inlcuded
• Plumbing is 1-1/2" on all ports.

This model was previously the Classic Aquadyne .60B

Aquadyne 2000 - Model .60B Filtration system is excellently suited to filter ponds and other aquatic habitats up to 2000 gallons. This filter is an excellent performer with most any external pump up to 3,900 GPH. The Dynamax Air Assist Backwash aggressively agitates the debris collected in the media bed and suspends it in the water column which is easily backwashed to waste, conserving water, and deep cleaning the filter media bed. The AD2000 is very suitable for an excellent indoor large volume aquarium filter. This unit is also an excellent starter for small laboratory research applications.

• Supports up to 50 pounds of fish.
• .60 Cubic feet of bead media (20 lbs)
• Dimensions: 16"D x 33"H, maximum pressure 50 psi.
• Average water to backwash 25 gallons.
• Pump Size: 1,000 - 3,200 gph.
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
• Plumbing is 1-1/2" on all ports.

This model was previously the Classic Aquadyne 1.1B

The Aquadyne 4000 - Model 1.1B filtration system is the most efficient and most maintenance free system ever introduced to the industry in such a small package. Just check the performance data list in this listing. The AD4000 can also be used with submersible pumps with ease.

The Dynamax blower aggressively agitates the debris collected in the media bed and suspends it in the water column which is easily backwashed to waste. With the blower this unit will use about 30 gallons per backwash. The Model AD4000 will support up to 85 pounds of fish while feeding once per day. The AD4000 is excellently suited for medium to moderately sized indoor large volume aquariums or more heavily stocked laboratory research applications. Also works exceptionally well for medium to moderately sized aquatic environments for alternative species exhibits. High quality quick disconnect unions are included.

• Supports up to 85 pounds of fish.
• 1.1 Cubic feet of bead media (40 lbs)
• Dimensions: 18"D x 38"H, maximum pressure 50 psi.
• Average water to backwash 30 gallons.
• Pump Size: 1,000 - 4,000 gph
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
• Plumbing is 1-1/2" on all ports.

This model was previously the Classic Aquadyne 2.2B

The Model 8000 - Model 2.2B filtration system is an excellent choice for a bead filtration system for larger ponds up to 8,000 gallons. The Model AD8000 far exceeds the performance of most all competitive filtration units in it's class. The 8000 is easily the most popular Aquadyne filter produced. 

This filter includes the Dynamax air assisted backwash which makes this model extremely efficient in all ranges of waste loading. This unit will efficiently filter 8000 gallons of water with up to 165 pounds of fish or other aquatic inhabitants. Even under the heaviest of waste loading, the Dynamax will break up a loaded media bed with ease. The larger media bed is very forgiving of neglect. You can backwash the Model 8000 with as little as 50 gallons of water. 

• Supports up to 165 pounds of fish.
• 2.2 Cubic feet of bead media (80 lbs)
• Dimensions: 24"D x 46"H, maximum pressure 50 psi.
• Average water to backwash 50 gallons.
• Pump Size:  1,000 - 6,000 gph.
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
• Plumbing is 1-1/2" on all ports.

This model was previously the Classic Aquadyne 4.4C

The Model AD16000 - Model 4.4C filtration system includes a 2" High efficiency Control Head with 2" ports in/out, with 3 ea. 2" self-sealing unions included. The Model 16000 is used in water features ranging from very large backyard lawnscapes to fisheries, to public aquariums, and the most discriminating laboratory applications. The AD16000 is capable of consuming large amounts of fish waste and neutralizing equally large amounts of ammonia and nitrite from the aquatic environment. The model 16,000 will support up to 330 pounds of fish or other aquatic life in up to 16,000 gallons of water, separating and backwashing huge amounts of solid particulate waste without clogging. 

The Dynamax air assisted backwash makes this model extremely efficient in all ranges of waste loading. The high efficiency central diffuser column allows an efficient water flow of up to 6,000 GPH (and maybe a little more) without sacrificing filtration efficiency. As with all other Aquadyne filters the 16,000 comes standard with the Dynamax air assisted backwash system.

• Supports up to 330 pounds of fish.
• 4.4 Cubic feet of bead media (160 lbs)
• Dimensions: 36"D x 48"H, maximum pressure 50 psi.
• Average water to backwash 50 gallons.
• Pump Size: 1,000 - 6,000 gph.
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
• Plumbing is 2" on all ports.

This model was previously the Classic Aquadyne 8.8C

The Aquadyne AD30000 - Model 8.8C filtration system is without doubt the most superior of all bead filters in its class. Boasting worry free maintenance on ponds up to 30,000 gallons. It moves filtration well into the commercial category, supporting extremely high pond or fish run water capacities with very heavy fish loads.

This model includes the Dynamax air assisted backwash which makes this model extremely efficient in all ranges of waste loading. This unit will efficiently filter 30,000 gallons of water with up to 660 pounds of fish or other aquatic inhabitants. Even under the heaviest of waste loading, the Dynamax will break up a loaded media bed with ease. Easily suited for applications where high volume ponds, research applications, or aquariums need to have exceptional performance under the most abusive aquatic circumstances without breaking the bank. The large media bed allows for an excessive accumulation of beneficial bacteria to consume very high amounts of ammonia and nitrite.

• Supports up to 660 pounds of fish.
• 8.8 Cubic feet of bead media (320 lbs)
• Dimensions: 36"D x 48"H, maximum pressure 50 psi.
• Average water to backwash 90 gallons.
• Pump Size: 1,000 - 8,000 gph.
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
• Plumbing is 2" on all ports.

This model was previously the Classic Aquadyne 2.2BHE

The Model AD8000HE - Model 2.2BHE filtration system includes a 2" High Efficiency Control Head with 2" plumbing in/out. This is the same control head and column as used in the Model 16000. The only difference is that the column is shorter in length, while maintaining the flow efficiency of the 16000. This additional efficiency allows an improvement in water flow by about 15% - 20% with low head, high efficiency pumps. 

As with the standard 8000 this model includes the Dynamax air assisted backwash which makes this model extremely efficient in all ranges of waste loading. This unit will efficiently filter 8000 gallons of water with up to 165 pounds of fish or other aquatic inhabitants. Even under the heaviest of waste loading, the Dynamax will break up a loaded media bed with ease. The larger media bed is very forgiving of neglect. You can backwash the Model 8000HE with as little as 50 gallons of water. In an 8000 gallon pond you will hardly even notice a water loss.

• Supports up to 165 pounds of fish.
• 2.2 Cubic feet of bead media (80 lbs)
• Dimensions: 24"D x 46", maximum pressure 50 psi.
• Average water to backwash 50 gallons.
• Pump Size: 1,000 - 6,000 gph.
• Compatible with the Dyna-Max Air Assist option.
• Includes 3 pre-assembled schedule 80 unions and pre-mounted male adapters.
• Plumbing is 2" on all ports.

Aquadyne Plug & Play Filtration Systems take the hassle out of the decision making and installation process for you. Ideal for both residential and commercial installations. The Aquadyne Systems far exceeds the performance of most all competitive filtration units in its class, capable of consuming large amounts of fish waste and neutralizing equally large amounts of ammonia and nitrite from the aquatic environment. Aquadyne systems can be set in place and put into service within a short time of arrival and no prior experience with system assembly is necessary.

All Aquadyne Plug & Play Filtration Systems Include:

• All Weather UV Resistant Equipment Pad
• Aquadyne Biological / Mechanical Filter Unit
• Delta Ultraviolet Sterilizer
• Performance Pro Pump
• Pre-configured Plumbing System w/UV Bypass
• Quick Disconnect Union Setup

*Electrical Control Panel is available as an upgrade option

The Aquadyne EcoSphere filtration systems are excellently suited to filter ponds and other aquatic habitats. Both models come standard with an Air Backwash system that performs just like the larger Aquadyne systems except in a small footprint package for smaller water features, ponds, aquaponic systems, quarantine systems, or other small aquatic habitats ranging in the 1000 to 4000 gallon class. These systems offer an efficient water flow. You can backwash with as little as 15 gallons of water. They include a 1.5" control head with 1.5" ports in/out, with (3) ea. 1.5" self-sealing unions included. These systems are also suitable for an indoor, large volume aquarium filter. These units are also an excellent starter for small laboratory research or aquaponic applications.

• Easy to install & simple to use
• Low maintenance and cleans in approx 5 minutes
• Full rinse cycle 
• Sludge waste drain
• Air backwash for complete waste removal

The Aquadyne Retrofit Bottom Drain is a stable and rugged over the liner bottom drain for those who do not want to install a drain through a liner, or for pre-constructed ponds that do not have a bottom drain. This drain is especially useful for pond and aquatic environments that have pre-existing liner, concrete, or any other situation that would not allow underground plumbing to be installed.

Simply fill the ballast area of the drain with small stone, sand, or other heavy inert material. Then attach a suction hose or rigid plumbing to the side port of the drain and attach to the pump suction line. Place the drain in the center or the deepest part of the pond so that the pump can easily suck up suspended solids and debris from the bottom of the pond. During the winter months, the drain can be easily moved to a more shallow part of the pond leaving the warmer water in the lower parts of the pond undisturbed where the fish collect in colder temperatures.

Rhino Retro Drains with Air Diffusers allow you to easily add much needed air circulation to ponds that increase oxygenation in hot weather and also create a sediment sweeping action due to the rising of thousands of air bubbles per second which adds circulation to the pond and helps keep the bottom of the pond cleaner.

The Rhino I Heavy Duty Bottom Drain is a must have item in your pond. With thousands of trouble free installs, from small home ponds to major commercial fish handling tanks to hydroponic field beds, the Rhino I is a very durable product that weighs in at over 4 pounds. 

• Thicker flanges and liner attachment ring that will not flex, distort or crack
• All attachments are precision machine fitted for extra strength with no need for gap filling
• All joints are hand welded resulting in more strength than the speed welds used on other drains.
• Rhino drains do not use any injection molded components which would weaken the structure.

The Rhino II brings commercial quality to your pond at an economical price. All Rhino drains are made from Schedule 80 PVC and designed by computer generated machine fabrication and are thermal welded by hand to assure top quality dependable welds. All Rhino drains can be installed with extreme confidence in any application by beginners and experts alike. A bottom drain can be said to be one of the most important parts of a pond installation, in that it’s integrity is paramount to the success of the entire project. 

• Thicker flanges and liner attachment ring that will not flex, distort or crack
  
• All attachments are precision machine fitted for extra strength with no need for gap filling
• Full 3" height over the discharge port of Rhino II equals more concrete over the horizontal discharge.
• Direct pipe connection into the air bladder. (no snaking an air line through the pipe)
• Rhino drains do not use any injection molded components which would weaken the structure.

The Rhino I OFS is a Heavy Duty Sch. 80 drain used as an Overflow Bottom Drain together with a vertical riser or as a Sidewall Return. This drain is also available with the standard cover plate. With the standard cover plate installed, you can convert back and forth between a standard drain and an overflow drain. Simply remove the cover and screw a 2" riser pipe into the internally threaded drain flange. Here again these drains are constructed of the same Sch 80 heavy duty material as the other Rhino drain models.

• Thicker flanges and liner attachment ring that will not flex, distort or crack
• All attachments are precision machine fitted for extra strength with no need for gap filling
• All joints are hand welded resulting in more strength than the speed welds used on other drains.
• Rhino drains do not use any injection molded components which would weaken the structure.

From time to time (rarely) beads require replacement. Especially true if you accidentally let beads out of your sludge valve on the bottom. These are the same beads as specified for your Aquadyne filter.

• AD1000 / Model .30B --- Requires  11  lbs. 
• AD2000 / Model .60B ---  Requires  20  lbs.
• AD4000 / Model 1.1B --- Requires  40  lbs.
• AD8000 / Model 2.2B --- Requires  80  lbs.
• AD8000HE / Model 2.2Bhe --- Requires  80  lbs.
• AD16000 / Model 4.4C -   Requires  160  lbs.
• AD30000 / Model 8.8C -- Requires  320  lbs.
• Ecosphere 10/20   --- Requires  10  lbs.
• Ecosphere 40/80   --- Requires  40  lbs.