ALL AQUASCAPE PRODUCTS

The Aquascape AquaSurge submersible pond pump is ideal for use in ponds, pondless waterfalls and is perfectly designed for use inside your skimmer. Available in 4 models to choose from 2000 - 5000 GPH. Extremely energy-efficient, they are made for continuous use in either horizontal or vertical orientation. They will not corrode or rust, and their rubber feet prevent noise and vibration while in use. Using asynchronous motor technology, providing high torque, trouble-free performance at higher head heights as well as excellent energy efficiency compared to magnetically driven pond pumps. You’ll save hundreds of dollars over traditional water pumps, and its oil-free design helps prevent pond contamination.

• Ideal for use in ponds, waterfalls, and other water features
  
• Extremely energy-efficient, asynchronous motor technology
  
• Can be used vertically or horizontally
• 20' power cord
• Included Fittings: (2) 1", 1.25", 1.5" multi-hose fittings; 1.25", 1.5", 2" multi-hose fitting; 1.5", 2" multi-hose fitting; 1.5" rotational ball output; 1.5" female coupler; 1.5" male coupler

Aquascape EcoWave submersible pond pumps are magnetically driven (mag-drive) pumps specifically developed to provide high flow rates at low head heights. The internal, smart mag-drive technology and vortex style impeller allow these pumps to push a large amount of water with an unmatched electrical efficiency. EcoWave submersible pumps are perfect for use in skimmers and pump vaults applications with lower head heights. Its durable housing will not corrode and included protective filter screen reduces maintenance and prevents damage to the pump.

• Energy efficient, made for continuous use
• Smart mag-drive motor technology
• 2" MPT discharge
• 20' power cord
• Included Fittings: (2) 1" - 1.5" multi-hose barbed fittings, 1.5" Rotational Ball Output, 2" FPT x 1.5" MPT, 1.5" Female Coupling

The Aquascape Ultra Submersible Water Pump is ideal for use with decorative fountains and spitters, external filters, small ponds, and other various water feature applications. Mag-drive technology makes this pump extremely energy efficient, saving hundreds of dollars over traditional pumps. A durable pre-filter cage design protects the pump while significantly reducing maintenance, providing years of trouble free operation. A wide, flat base and rubber feet makes the Ultra Pump stable and decreases the amount of vibration during use, while the oil-free design prevents pond contamination.

• Ideal for use with decorative fountains, external filters, small ponds, and more
  
• Durable prefilter cage design prevents clogging and reduces pump maintenance
  
• Extremely energy-efficient, saving hundreds of dollars over traditional water pumps
• Ultra 400, 550 - 12' power cord
• Ultra 800, 1100, 1500, 2000 - 25' power cord
  

Need a replacement sponge kit?
Need a replacement impeller kit?

The Aquascape AquaSurge adjustable flow sumbersible pond and waterfall pump is ideal for use in ponds, waterfalls, and other water feature applications, allowing you to wirelessly adjust the flow of water. Made for continuous use in either vertical or horizontal orientation. Asynchronous motor technology makes this pump extremely energy-efficient. The included Smart Pump Receiver includes an integrated control panel and makes it easy to control your pump manually or with the Aquascape Smart Control App, including flow adjustment and customized scheduling. An optional universal remote is available separately (#45041) to allow wireless control without the use of a smartphone or tablet. 

• Ideal for use in ponds, waterfalls, and other water features
• Flow can be controlled from anywhere using a smartphone or tablet
• Asynchronous motor technology makes this pump extremely energy-efficient
  
• Dimensions: 14"L x 6"W x 7.5"H
  
• 20' power cord
• Fittings Included: (2) 1", 1.25", 1.5" multi-hose fittings; 1.25", 1.5", 2" multi-hose fitting; 1.5", 2" multi-hose fitting; 1.5" rotational ball output; 1.5" female coupler; 1.5" male coupler

Aquascape AquaForce submersible pond pumps are ideal for use in ponds, waterfalls, and other water feature applications. A protective pre-filter cage and wide, flat base allows the pump to be placed directly in the pond. If your pond doesn’t have a skimmer to house a pump, then you want to choose an in-pond pump. These pumps include a pre-filter cage to prevent debris from clogging the motor. Its oil-free design and high-torque performance will provide years of trouble-free operation, while the protective pump cage will handle solids up to one quarter of an inch, preventing clogging and reducing maintenance. A variety of fittings are included for simple installation, including a rotational ball output that allows the discharge position to be adjusted for simple installation. 

• Ideal for use with ponds, external pressure filters, and waterfalls
  
• Protective cage allows the pump to be placed directly into the pond
  
• Asynchronous motor technology is extremely energy efficient
• 25' power cord
• Dimensions: 14"L x 14"W x 6.5"H
  
• Included Fittings: 1.25", 1.5", 2", Multi-Hose Fitting, Locking Rotational Ball Fitting, 2", 1.5" Multi-Hose Fitting

The Aquascape AquaForce PRO 4000-8000 adjustable flow submersible solids-handling pond pump is an energy-efficient submersible pump made for continuous use with ponds, waterfalls, external filters, and other water feature applications. A protective pre-filter cage and wide, flat base allows the pump to be placed directly in the pond. If your pond doesn’t have a skimmer to house a pump, then you want to choose an in-pond pump. The included Smart Pump Receiver includes an integrated control panel and makes it easy to control your pump with the Aquascape Smart Control App, including flow adjustment and customized scheduling. An optional universal remote is available separately (#45041) to allow wireless control without the use of a smartphone or tablet. A variety of fittings is included for simple installation, including a rotational ball output that allows the discharge position to be easily adjusted. 

• Energy-efficient, asynchronous motor design provides superior reliability
• Includes Smart Control Receiver for quick and easy pump control using the Aquascape Smart Control App or on-board controls
• Protective pre-filter cage allows the pump to be placed directly into the pond
• 20 ft power cord
• Dimensions: 14"L x 14"W x 6.5"H
  

The Aquascape SLD Adjustable Flow Submersible Pond Pump is a professional-grade, pump made for continuous use in ponds, skimmers, pondless waterfalls, and other water feature applications. Solids handling, effectively resulting in less maintenance and trouble-free performance. Rubber feet prevent noise and vibration. The included Smart Pump Receiver includes an integrated control panel and makes it super easy to control your pump manually or with the Aquascape Smart Control App, including flow adjustment and customized scheduling. An optional universal remote is available separately (#45041) to allow wireless control without the use of a smartphone or tablet. 

• Asynchronous motor design provides reliability with less maintenance
• Flow can be controlled from anywhere with your smartphone or tablet
• Smart Control Receiver for flow control using the Aquascape Smart Control App
• Integrated control panel with digital display for quick and easy flow adjustment
• 2" FPT discharge

AquascapePRO submersible pond and waterfall pumps are ideal for use in pond skimmers, waterfall filter systems and pondless waterfall vaults. Known for their durability and performance, AquascapePRO pond pumps heavy-duty construction provides strength and corrosion resistance, ensuring years of trouble-free use. Powerful solids handling direct-drive motor reduces clogging and decreases maintenance. AquascapePRO Pond Pumps provide high flow-rates and work efficiently in higher head height applications. Featuring a low profile horizontal design and integrated rubber feet ensure quiet pump operation by reducing vibration. 

• Ideal for use in pond skimmers and pondless waterfall vaults
• Built with stainless steel and composite resin
• Powerful direct drive motor
• 20' power cord
• 2" FPT discharge

Aquascape PL and PN Series pumps are submersible solids-handling pond pumps for ponds, pondless waterfalls, and other water feature applications. Known for durability, performance, and value, each is constructed from stainless steel and composite resin for strength and corrosion resistance. The energy-efficient, continuous-duty, direct-drive motor operates at lower temperatures, extending the life of the pump significantly. The pump also contains a built-in thermal overload, protecting it from damage if ever run in low-water conditions.

• Stainless steel and composite resin construction
• Semi-vortex impeller allows solids handling
  
• Built-in thermal overload
  
• 20' power cord

The Aquascape Pond Powerhead is an innovative submersible pump designed to create water movement and eliminate stagnant areas in ponds and water gardens. This standalone recirculating pump does not require any pipe or plumbing, simply set the powerhead directly in the pond or disguise it into the pond using rocks or other materials. The adjustable head allows flow control in any direction. Wired like low-voltage lighting, it can be powered by a standard outdoor 12-volt low voltage transformer (sold separately).

• Increases water circulation and movement in stagnant areas
• Easy to install - simply set in pond
• 2,000 GPH of water flow
• Wired like low-voltage lighting (transformer sold separately)
• 20 ft. power cord
• 40 watts

*Transformer sold separately*

The perfect submersible pump for pond, water feature and fountain cleanouts. This solids-handling pump has the capability of pumping up to 4,200 GPH saving you time with every use. The specially designed bottom intake allows the pump to draw water down to 1/4 inch from the bottom of the water feature. The Aquascape Cleanout pump is an essential piece of equipment for any homeowner, water garden contractor or DIY water feature owner. 

• Great for pond cleanouts and installation wash-downs
• 4,200 GPH for fast pump-outs
• Pumps water down to 1/4 inch off the bottom
• Dimensions: 12"H x 8.5"W
• 20' power cord

The Aquascape AquaJet submersible pond and fountain pump is the complete solution for ponds up to 2,000 gallons. These all-in-one kits combine an energy efficient pump, decorative fountain display with three fountain head options, and an integrated diverter valve that can supply water to a small waterfall, external filter, or spitting ornament. The adjustable, rotational riser stem makes it simple to adjust the fountain head to varying heights and positions. A protective pump cage prevents debris from clogging or damaging the pump and allows the pump to sit directly in the pond.

• Energy-efficient, magnetic drive pump
• Durable prefilter cage design prevents clogging and reduces maintenance
• 25' power cord
• Dimensions: 12"L x 12"W x 6"H
• Includes 3 fountain heads (Foaming Jet, Waterbell, Daisy), diverter valve & multi-hose adapter

Aquascape Statuary and Fountain submersible pumps are the ideal choice for supplying water to run fountains, small water features, and decorative spitting ornaments. They are super easy to install and maintain, and the durable pre-filter cage prevents clogging and reduces pump maintenance. The included flow-control valve allows you to customize the water flow to the desired rate. The pump’s oil-free design prevents pond contamination and wide flat base makes it stable and easy to place during setup. 

• Extremely energy-efficient
• Built-in flow control
• Durable prefilter cage prevents clogging and reduces maintenance
• 6' power cord

The Aquascape Fountain Head Kit is ideal to add the beauty and sounds of a fountain to your water feature while retaining the ability to divert water flow to an additional accessory such as a decorative spitter or a pond filter. The included diverter valve allows for the adjustment of both the flow to the fountain head attachment and the diverted flow to an accessory. Fountain heads are also an excellent way to help oxygenate your pond to ensure that the ponds ecosystem is healthy.

• (1) Diverter Valve Assembly
• (4) Fountain Riser Stems
• (1) Foaming Jet Fountain Head
• (1) Waterfall Fountain Head
• (1) Daisy Fountain Head
  

Replacement impeller kit for use with Ultra Pump. Contains (1) complete impeller assembly.

Replacement sponge for use with Aquascape Ultra Pumps

The Aquascape UltraKlean Biological Pressure Filter with a high output ultraviolet clarifier/sterilizer and an integrated electronic bulb-saver option, provides pond owners with optimum clear water conditions and eliminates green pond water for pond and water features. The unique sponge-free design minimizes maintenance and maximizes efficient mechanical and biological filtration and efficiently traps dirt and debris. Simple-to-use cleaning feature allows for the unit to be back washed in less than five minutes without opening the canister or getting hands dirty. 

Features and Benefits

• Easily integrated into new or existing ponds
• 20' power cord
• Barb fitting connection sizes - 1", 1.25", 1.50"
• 3 Year Limited Warranty

Not recommended for use with external or submersible direct-drive (motor driven) pumps.

Aquascape UltraKlean Filtration Kits take the guesswork out of selecting the correct submersible pump and external filtration combination for any new or existing pond. Available in three sizes and two configurations, there is an UltraKlean filter kit for almost any pond configuration. Buying a filtration kit is simple and provides the best overall value as components are selected by Aquascape not only for size of pond, but also matched components that will work well together as a team. Each Aquascape Kit includes a UltraKlean Pressure Filter with Integrated UV Clarifier/Sterilizer, AquaForce® Solids Handling Waterfall Pump and 25 feet of tubing with hose clamps. Three different options for different sized ponds up to 3500 gallons. Units include a 3 year warranty on both pump and filters. 

Aquascape Professional Grade Bio-Falls Waterfall Filters provide the most filtration and highest water flows in the market. Made from durable rotational molded polyethylene ensuring maximum strength. Biological filters are positioned to create the beginning of the waterfall in your pond. The filter uses bacteria to break down pond wastes, converting them into less harmful compounds that can be used as aquatic plant fertilizers. Water enters via flexible pipe located near the base of the unit. The water then flows from the bottom to the top, traveling through filter media and Bio-balls (optional) housed inside the unit. The filter media helps with the removal of fine to medium-sized particles. As the filter fills, it overflows and cascades over its waterfall lip, cascading down rocks that have been set to create a waterfall. The waterfall creates aeration for your pond, assisting in the circulation and health of the water. 

The Aquascape Pond Filter Urn is ideal for smaller ponds in need of filtration, including preformed ponds or container water gardens. Aquascape Pond Filter Urn can easily be incorporated into existing ponds, ideal for use with Aquascape Ultra or AquaJet Submersible Water Pump. The decorative filter urn gives an added trickling effect and sound of running water to the pond. The unit comes complete with Mechanical and biological filter media and allows for easy access to clean with the removable lid.

The Aquascape Container Water Garden Filter is ideal for small to medium sized container water gardens that have up to 50 gallons of water. The Container Water Garden Filter is small enough to fit into tight spaces yet contains everything you need to filter the water. The filter houses a pump, a mechanical filter sponge, & biological carbon media which provides great filtration and reduces maintenance. The filter also contains a protective cage/cover to prevent the internal pump from damaging or clogging.

• Adjustable spray bar or hose barb attachment
• Energy efficient mag-drive pump uses only 7 watts of electricity
• Unit must be fully submerged at all times

The perfect DIY solution for filtering small ponds up to 1,000 gallons. The Pond Waterfall Filter provides efficient mechanical filtration, biological filtration, and crucial aeration while creating a waterfall. The compact and simple construction allows the filter to be easily incorporated into new or existing ponds. It can also be turned into a beautiful, natural-looking waterfall or disguised into the landscape using rocks or other landscape materials. The extended spillway and integrated drip edge effectively prevents water loss. Included filter mat provides efficient filtration, collecting finer debris as it passes through the filter. A biological filter media net is included to hold BioBalls or other biological filter media (not included) which help keep pond water healthy. Installation is quick and easy. 

• Max flowrate: 5,000 GPH
• Included multi-hose fitting accepts 1" - 1.5" tubing
• Spillway Width 12"
• Dimensions: 20”L x 15”W x 12.5”H

The Aquascape Waterfall Spillway is a cost-effective way to create the starting point on any waterfall or stream, providing a smooth consistent water flow. The spillway is a versatile tool that can be used in a wide variety of water feature applications. As the incoming water rushes in, the water is diffused by strategically positioned internal barriers, creating smooth flow of water.  Ideal solution for pondless disappearing waterfall systems where large and expensive biological filters are not necessary. It can also be installed as an additional waterfall or stream onto a new or existing pond. Its durable design allows boulders, gravel, soil or other creative landscape material to be set directly on top, making it easy to camouflage into the surrounding landscape. 

Features:

• Low profile and durable design
• Includes 2" PVC slip and barbed fitting
• Channel Locks required