ALL EASYPRO PRODUCTS

EasyPro Stainless Steel TH Pumps are ideal for ponds, waterfalls, fountains and other applications where continuous duty, water circulation is required. Their compact design makes them a great choice for pond skimmers. A stainless steel motor housing, built-in thermal overload protection and wear/clog resistant vortex impeller makes this pump one of the most popular pumps in the pond and water feature industry.

• Rugged motor - designed for long life
• Vortex design prevents clogging
• 2" FPT outlet
• 20' power cord

EasyPro Submersible pond pumps stand out from the crowd in features, benefits and durability. For low head applications, these Mag Drive pumps are unbeatable and with few moving parts, their reliability is unsurpassed.

• Quiet and very energy efficient
• Foam prefilter included on all pumps 120 GPH -1350 GPH. Larger pumps have screened inlet but no foam
• Flow restricted valve included with each fountain set, 600 GPH -1350 GPH fountain sets include diverter valve allowing you to run a fountain nozzle and a waterfall at one time
• Fountain set included with all 120 - 1350 GPH pumps
• Threaded discharge ports on all pumps for easy fitting connection

Spirit pond and stream pumps. Energy efficient direct drive pond and stream pumps ideal for use in skimmer. These compact units can be used vertically or horizontally. The new Spirit pumps by EasyPro are made in Italy with quality components for years of reliable service. Three sizes meet the needs of a wide range of pond and stream applications.

• Oil-less design is fish and plant safe
• Triple sealed, 115v motors for maximum life span
• Can be used vertically or horizontally
• Energy efficient direct drive pumps
• Compact size – great for skimmer use
• 1 1/4″ female threaded outlet
• Includes 1 1/4″ x 1 1/2″ threaded elbow
• 16′ power cords

Faster to install and Tougher spillway than any other spillway on the market

• Ideal for use at beginning of streams and in block walls, pools and formal fountains
• Low profile design of only 3-1/2"
• Extra strong vertical rib design creates a nearly indestructible diffuser
• Dual 2" inlets

Keeping ponds clean is made easier with the installation of an EasyPro skimmer. Skimmers keep floating debris such as leaves, grass clippings or other material from sinking to the pond bottom. EasyPro offers the most innovative and professional grade skimmers available.

• Front to back design - with the pump sitting behind the debris net instead of along side the debris net
• Adjustable overflow allows finished pond level to be adjusted
• One piece aluminum framed debris net makes cleaning quick and easy
• 5,000 and 7,000 gallon skimmers come with dual 2" factory installed spin weld fittings (bulkheads) allowing for one or two pump installations
• 9,000 and 11,000 gallon skimmers come with two 2" and one 3" factory installed spin welds allowing for two smaller or one larger pump
• 5,000/7,000/9,000 gallon skimmers are compatible with the SETS2 extension tube

Keeping ponds clean is made easier with the installation of an EasyPro skimmer. Skimmers keep floating debris such as leaves, grass clippings or other material from sinking to the pond bottom. EasyPro offers the most innovative and professional grade skimmers available.

EasyPro Pro-Series Pond Skimmers Feature:

• Innovative design allows you to choose between a vertical filter mat or filter brushes
• Two chamber design eliminates cutting filter pads to fit around the pump and plumbing
• Pumps can be inspected or removed without removing mesh net or filter pad
• Skimmers have a flange above the opening where water enters from the pond into the skimmer, allowing you to not only stack rocks along side but also above the skimmer opening
• Internal filters help prevent the pump from plugging and are easy to clean
• Rock Lid pictured is included

• These plastic Bio-Balls area a great media for use in all types of filters
• Can be used as a loose media or put in mesh bags for easy cleaning
• Will not compact like other soft media
• 1.5" diameter

EasyPro Pro-Series Skimmer Extension Tube makes your pond look much more natural by moving the skimmer box away from the pond.

• 24" long extension tube allows skimmer to be set back from the pond edge
• Allows for planting between the pond and skimmer making it easier to hide
• Can be bolted together to create longer extensions if needed
• Price includes extension tube and bolts for installation
• Ideal for use in concrete walls

EasyPro Eco-Clear Pressure Filters provide excellent, dual filtration for ponds. Ideal for preformed ponds and small water features needing effective filtration. EC2600 and EC3900 unit bonus features: Cleaning indicator - shows when filter needs to be cleaned. Backwash valve to extend time between full cleanouts

• Sturdy filter housings – can be partially buried up to cleaning ring for easy concealment
• Dual filtration – filter pads collect solid debris while bio-media provides biological filtration
• Optional UV for crystal clear water
• Filters are easy to disassemble and clean, making maintenance a snap!
• Multi-step connectors – inlet/outlet fittings accept a variety of tubing sizes

Not recommended for use with external or submersible direct-drive (motor driven) pumps.

Combines mechanical and biological filtration all in one!

EasyPro Axiom Pond Skimmer/Filter Combo Features:
• Includes debris net and filter brushes for mechanical filtration
• A second compartment behind mechanical filtration holds UTM1 biological media, included, for complete water filtration
• Maximum flow rate 60 GPM (3600 GPH)
• Use with SETS2 extension tube (optional)

EasyPro Pro-Series Aquafalls biological waterfall filters help keep ponds clean and clear while supplying an ideal base for waterfalls and streams. Pond water flows up through filter pads and biological filter media (not included) with high surface area allowing suspended debris to be trapped and beneficial bacteria to provide natural biological filtration. 

EasyPro Pro-Series Aquafalls biological waterfall filters help keep ponds clean and clear while supplying an ideal base for waterfalls and streams. Pond water flows up through filter pads and biological filter media (not included) with high surface area allowing suspended debris to be trapped and beneficial bacteria to provide natural biological filtration. 

• Includes termination strip to attach liner instead of faux rock lip for those who prefer to use real stone
  
• AquaFalls Filters are buried into the ground making them easy to hide.
  
• Inlet hole on each side of the filter. Use the one that's most convenient for your incoming water and simply plug the other hole with plug (included) or buy a ball valve and use the second hole as a drain.
  
• Can be ordered with standard poly pads or Matala Filter Pads.
  

Extra strong grate available for the small, medium and large Aqua Falls

• Makes it very easy to cover the falls box with rocks and plants
• The small filter grate is an egg crate shaped material while the medium and large grates are an engineered structural plastic material

EasyPro Pro-Series Pump Vaults are:

• Built heavy duty to withstand the pressure of being buried under rock
• The slots cut in the sides allow water into the pump
• Intake tubes available for JAFM and JAFV to increase flow capacity

Real basalt columns have unmatched simple beauty. Perfect for creating a bubbling feature in a landscape or indoors, these columns will provide years of enjoyment. Each column is core drilled with a 1-1/4″ hole from end to end, the last 1-1/2″ is enlarged to 1-3/8″ to house an optional light ring. Natural cut sides with sloped natural end make for a beautiful display even if the pump is off. 

• Due to natural characteristics of stone the size, weight and number of sides may vary.
• 20" - approx. 70 lbs
• 27" - approx. 110 lbs
• 35" - approx. 155 lbs

• Ideal for use with light weight resin type statuary pieces
• Clear span grating - no legs for easy pump installation and removal
• 100 lb load rating with grating only
• 500+ lbs when used with concrete blocks under grating
• 40" and 48" sizes available

Ideal for small statues, vases or rocks where splash is minimal. Has the thickest, strongest grating  of any similar product. Roto-molded for superior strength. 

• Pump access door for easy pump removal and cleaning. 
  
• Fine mesh screen included

EasyPro Eco-Series Miniature Pump Vaults are:

• Roto-molded for excellent strength
• Can be used with JAFME extension
• Ideal for mag drive pumps
• Can be used in small Just-A-Falls or custom built fountain basins

These submersible trash pumps handle sand, solids, leaves, algae and other debris up to 3/8" x 1" in size. Ideal for waterfalls where algae and leaves are a problem, recirculating systems where solids removal is needed, dewatering applications where sand and sludge are being pumped, or any other dirty or clean water application where a high quality, continuous duty pump is needed.

• Great for pond cleanouts
• 115V
• 2" FPT discharge
• 20' power cord

EasyPro TM Series submersible waterfall pumps are perfect for low to medium head streams and waterfalls. Their compact design allows for use in larger skimmers or pump vaults.

• Up to 17,500 GPH flow
• Top quality Japanese double mechanical seals 
• Ideal for low to medium head waterfalls
• Thermal overload protection
  
• 3" FPT outlet
• 30 ft power cord

EasyPro TB Series submersible waterfall pumps are perfect for high head streams and waterfalls. Their compact design and unmatched durability allows for use in large skimmers or pump vaults in continuous duty pond and water feature applications.

• Designed for use with higher head pressure
• Top quality Japanese double mechanical seals
• Thermal overload protection
• 3" FPT outlet
• 20 ft. power cord
• A minimum of 20' head pressure required for TB12000 and TB14500, use ball valve to create back pressure if system has less than 20' head pressure

More than just an underwater light! Use with pathways and bridges to accent your pond. Ideal for use with EasyPro Vianti Falls stainless steel spillways, waterfall diffusers, underwater to light up waterfalls, streams, ponds or in the landscape!

• Available in 11", 23" or 35" lengths
• 15' power cord between light and transformer
  
• Includes transformer
• Use in or out of water (fresh water only)

This submersible light and light strip can be used in the Vianti Falls spillways or other applications to light up a pond, waterfall or landscape feature. Remote control required and sold separately.

• Wide spectrum of color options
  
• All Cabrio lights can be synchronized with single remote
  
• 15' power cord
• CLEDRC Remote Control Required (sold separetely)

LED6B 6 Watt Warm White LED Light Bulb

• MR16 base
• 2800K warm white
• 25 degree beam angle

Vianti Falls stainless steel spillways are a stylish highlight for your patio, entry way or as a stand alone water feature. The soothing sheet of water adds beauty and elegance to any landscape. EasyPro Vianti Falls Spillways are made with stainless steel for maximum strength!

• Available in a variety of sizes and styles
• LED light strips can be used on spillways
• Internal baffle calms incoming water " creating even, smooth flow over lip
• Ideal for formal features, signs and swimming pool features
• Rated for 600 GPH per foot of width
• Max drop of 4 ft. If higher, the water sheet will begin to break apart.

EasyPro Fittings for Vianti Falls Spillway are not included with the spillway.

Vianti Falls Kits are everything you need to build a simple yet beautiful waterfall using the block wall of your choice!

• Molded basin
• Vianti Falls stainless spillway
• EasyPro mag drive pump
• PVC flex pipe and fittings
• Optional auto fill valve and LED light package

EasyPro Pump Pro-Tector

• Protect against plugging by creating a large surface area around the pump.
• Designed to fit all brands of small pumps.
• Has a polyester filter media pad inside of a nylon mesh bag.
• Drawstring top with push button release keep the top closed around the pump yet makes for easy pump removal.

This durable fill valve is ideal since the float is contained inside the valve box. No chance of damaging unit when lifting pumps in or out of skimmer.

• Delivers up to 245 GPH at maximum of 55 PSI
• Includes fitting to connect to 1/2" vinyl tubing
• Fits in small or large skimmer

• Ability to rotate valve for inlet options
• Proportional flow control
• Easy to turn and secure valve
• 50 psi maximum working pressure

These check valve assemblies are used inside Pro-Series skimmers to bring the flow of water from the pump up to the outlet hole in the back wall of the skimmer. In an ideal world all pumps would have their outlet at the same height but that is not the case so various height assemblies are needed. Each assembly includes a check valve which keeps the plumbing line full of water even when the pump is off. Please see chart below for the correct pump/skimmer check valve. 

CVA20TH is for TH series pumps in PSA5000, PSA7000, PS1V or PS1FB skimmers and JAFM, JAFL or PV60E vaults

Use to fill in cracks between rocks to prevent water from being"lost" over the waterfall

• Patented trigger system allows for multiple uses.
• Improves water flow visually and black color hides foam in the shadows of the rocks.
• Trigger will dispense foam in any position.
• Fish safe, non toxic formula.
• Minimal expanding foam - fills in cracks with less trimming of excess foam.

This formulation is one of the most comprehensive water conditioners available. Apply directly to new ponds or immediately after water changes to remove toxins and reduce stress on fish or other aquatic life.

• Removes ammonia, chlorine and destroys chloramines.
• Detoxifies nitrite and heavy metals.
• Adds essential electrolytes, enhances skin slime coat and reduces stress.

Pond-Vive is a proprietary blend of enzymes and beneficial bacteria formulated to help improve water quality and reduce sludge in ponds, lakes and other water bodies. By consuming and breaking down waste in the pond, Pond-Vive bacteria reduce the nutrient load of a pond to help keep it in balance and improve overall water quality. When used in conjunction with aeration Pond-Vive works with nature to provide clean, clear water and reduce reliance on pond chemicals.

• Reduce sludge buildups.
• Eliminate pond odors.
• Improve water clarity.
• Reduce oxygen demand.
• Eliminate excess nutrients.

These mesh bags are used in each of our AquaFalls Filters (quantity varies by size of filter), but can be used for a wide variety of other aquatic applications.

EasyPro Pond UV Clarifiers effectively clear green water algae blooms. Built in safety switch automatically turns bulb off when top cover is removed. Dual outlets allow you to choose which side of the UV is easiest for your plumbing layout - outlet can be on same side as inlet or opposite side!

• Dual outlets allow you to choose plumbing location
• Tough, impact resistant housing with weatherproof ballast
• Multi-step barb connectors for 3/4″, 1″, 1-1/4″ and 1-1/2" tubing
• Threaded housing is 1-1/2″ MPT 
• 15 ft. power cord