Direct Drive Pumps

EasyPro Stainless Steel TH Pumps are ideal for ponds, waterfalls, fountains and other applications where continuous duty, water circulation is required. Their compact design makes them a great choice for pond skimmers. A stainless steel motor housing, built-in thermal overload protection and wear/clog resistant vortex impeller makes this pump one of the most popular pumps in the pond and water feature industry.

• Rugged motor - designed for long life
• Vortex design prevents clogging
• 2" FPT outlet
• 20' power cord

PerformancePro WellSpring submersible pond and waterfall pumps are designed for easy in-pond, skimmer, or sump installations. The high quality components and durable construction ensure efficient operation and long term reliability. The semi-open impeller design aids to prevent clogging and waterproof cable and seals protect the pump motor. Available in 1/4 HP to 1 HP sizes.

• Overload protection helps prevent motor burn out
• Freshwater applications only
• 2” FPT discharge
• 20 ft. power cord

Atlantic TidalWave PAF-Series submersible pond and waterfall pumps are perfect for demanding high-volume applications, ideal for in skimmer use. They feature energy efficient direct drive motors, double silicone carbide mechanical seals and fiber-reinforced vortex impeller ensure dependable, long lasting service. Overload and thermal protection shuts down pump before overheating can cause damage. A removable intake screen allows for solids handling capacity. PAF-Series pumps are rugged and lightweight for easier servicing and a long life. 

• Stainless steel and composite construction
• Double silicon carbide mechanical seals
• Fiber-reinforced vortex impeller
• Removable intake screen for solids handling capacity
  
• Thermal overload protection
• 20 ft power cord

The Pondmaster ProLine HFS Series submersible pond pumps are a great choice for ponds, waterfalls, fountains, and similar applications. Its compact design is ideal for use in skimmers and pump vaults. The torque flow vortex impeller eliminates clogging and binding - made of fiberglass reinforced polypropylene for minimal abrasive wear. Built-in thermal protection protects against overload or overheat conditions.

• Solids handling capability
• Durable, stainless steel corrosion resistant motor
  
• Thermal overload protection with automatic reset
  
• High quality mechanical Seals
  
• 20’ grounded power cord

AquascapePRO submersible pond and waterfall pumps are ideal for use in pond skimmers, waterfall filter systems and pondless waterfall vaults. Known for their durability and performance, AquascapePRO pond pumps heavy-duty construction provides strength and corrosion resistance, ensuring years of trouble-free use. Powerful solids handling direct-drive motor reduces clogging and decreases maintenance. AquascapePRO Pond Pumps provide high flow-rates and work efficiently in higher head height applications. Featuring a low profile horizontal design and integrated rubber feet ensure quiet pump operation by reducing vibration. 

• Ideal for use in pond skimmers and pondless waterfall vaults
• Built with stainless steel and composite resin
• Powerful direct drive motor
• 20' power cord
• 2" FPT discharge

Tsurumi submersible water feature pumps are pond pumps designed to circulate water in garden ponds, create waterfalls and water features. Durable resin molded parts aid in longer overall pump life. Semi-vortex, fiberglass reinforced plastic, impeller passes solids and stringy material without clogging and increases wear resistance when abrasive particles are present.

• Ideal for use in ponds, waterfalls, and decorative water features.
• Corrosion resistant
• Eco-friendly operation
• Watertight cable entrance with Anti-wicking block

The Matala Versiflow is a high flow multi-purpose versatile pump. The Versiflow can be installed vertically or horizontally, are fully submersible and handle solids like a champ. They are excellent for heavy and continuous flow for waterfalls, filters, fountains, and water features. Ideal for use in skimmers, pondless waterfall vaults or directly inside the pond. A built-in thermal overload protects the motor from overheating and the removeable inlet screen protects the impeller. 

• Heavy and continuous duty
  
• Operates in horizontal or vertical position
• Energy efficient design reduces operating cost
• Solids handling
• 19’ power cord

The Matala Geyser Max-Flow submersible pump is great for all kinds of applications in skimmer boxes, pondless waterfall vaults or just drop in the bottom of the pond or fountain. Perfect to power waterfalls or a variety of decorative features. Geyser Max-Flow pumps were specially designed with a composite resin base for high performance and low amps. Featuring a built in thermal overload protection and designed for 24 hour continuous use. These pumps are great at pushing high volumes of water at low heads. A slotted bottom prefilter protects the impeller.

• Composite resin base, corrosion resistant
• Low amps, high performance
• Built-in overheat protection
• Continuous duty
• 19 ft. power cord

The Leader Solid Answer are submersible direct-drive pumps designed to circulate water in ponds, run waterfalls, fountains, and can be used for pond clean-outs. Suitable to pump water containing particles with a maximum diameter up to 1-1/4". Designed to work in horizontal and vertical installations. A built-in thermal overload protects the motor from overheating. Built with anti-corrosive and rust-proof materials, featuring a wear resistant shaft and impeller.

• Handles solids up to 1-1/4"
• Can work in horizontal and vertical installations
• Built-in thermal overload protection
• 16 ft power cord
• 1-1/4" FPT outlet

The Leader Clear Answer are submersible direct-drive pumps designed to circulate water in garden and fish ponds, run waterfalls, fountains, and can be used for pond clean-outs. Suitable to pump water containing particles with a maximum diameter up to 1/3". A built-in thermal overload protects the motor from overheating. Built with anti-corrosive and rust-proof materials, featuring a wear resistant shaft and impeller.

• Handles solids up to 1/3"
• Anti-corrosive and rust-proof materials
• Built-in thermal overload protection
• 16 ft power cord
• 1-1/4" FPT outlet

Aquascape PL and PN Series pumps are submersible solids-handling pond pumps for ponds, pondless waterfalls, and other water feature applications. Known for durability, performance, and value, each is constructed from stainless steel and composite resin for strength and corrosion resistance. The energy-efficient, continuous-duty, direct-drive motor operates at lower temperatures, extending the life of the pump significantly. The pump also contains a built-in thermal overload, protecting it from damage if ever run in low-water conditions.

• Stainless steel and composite resin construction
• Semi-vortex impeller allows solids handling
  
• Built-in thermal overload
  
• 20' power cord

The 4HF features a 304 Stainless Steel housing, oil-free motor, and an axial flow impeller for incredible flows at low head heights and low energy consumption, while passing a 0.3" solid. Its larger size and incredibly high flow may require more space and flow than a skimmer can provide, so be sure to check fit. The cast iron axial-flow impeller achieves huge flow rates with low energy consumption. Dual inside mechanical seal with silicone carbide faces provide long life and an oil lifter provides lubrication of the seal faces.

• 1/2 HP
• 4" discharge size
• 16 ft. power cord
  
• Dimensions: 10"D x 22"H
• Pump weight: 40 lbs

LB-480 Slimline design pump allows to fit into 8" pipes for residential, commercial, industrial wastewater and site drainage. Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability.

• Urethane, Semi Vortex Impeller and Wear Plates for maximum durability and maintaining pump performance.
• Dual Inside Mechanical Seal With SiC faces provides longer operational life.
• Oil Lifter provides lubrication of the seal faces. 
• 2" discharge
• Dimensions: 7-11/16"D x 11-1/4"H
  

Savio Water Master Solids Handling Submersible Pond Pumps are Savio's top of the line model for professional pond use. Ideally used in pond applications like large fountains, water features and waterfalls. Heavy duty construction - they can handle spherical solids up to 1 1/4". Thermal overload protection protects pump from burn-out.

• Non corrosive - Super strong polymer housing resists corrosion and breakage
• Oil-less - Safe for environments with fish and plants
• Reliable - Heavy duty sealed ball bearings and mechanical seals
• 16 ft. cord; 115 v

Utilizing the same wear-resistant, internal components as Savio's industry leading Water Master Solids series, Water Master Clear pumps trade solids handling capability for higher head pressures. Housings and internal components are completely non-corrosive and oil-less for the safety of fish and plants. Savio Water Master Pumps feature heavy-duty sealed ball bearings, a ceramic-coated shaft for hardened wear resistance, and - virtually unheard of in the business - an innovative third lip seal on the impeller for maximum protection (the majority of pumps only use two). Our engineers have addressed it all - even built-in thermal protection to protect the pump in case of a low water condition.

• Non corrosive - Super strong polymer housing resists corrosion and breakage
• Oil-less - Safe for environments with fish and plants
• 1 1/4" FNPT Outlet
• 16 ft. cord; 115 v

Tidal Wave A-Series direct drive submersible waterfall pumps are built for the highest head, high volume applications, to tackle the longest runs and tallest waterfalls. Tidal Wave L-Series submersible axial pumps economically deliver very high volumes of water at low head through large diameter plumbing for wide waterfalls or where massive flows are required. Both offer a thermal overload protection that shuts down the pump in low water conditions, to prevent serious damage due to overheating

Tidal Wave A-Series Features:

• High-head / High-volume, direct-drive pumps
• Double silicone carbide mechanical seals and dual drive bearings
• 30' power cord

Tidal Wave L-Series Features:

• Low-head / High-volume, axial flow pumps
• Double silicone carbide mechanical seals and dual drive bearings
• 30' power cord

The Tsurumi Submersible Pond and Trash pumps are available in two sizes—a 1HP & 3-inch discharge and a 1/2HP & 2-inch discharge. Both designed to pump water containing sand, solids and debris with minimal wear and clogging. Tsurumi Trash pumps are submersible pumps designed to circulate water in garden ponds, create waterfalls and water features. Durable resin molded parts aid in longer overall pump life. Semi-vortex, fiberglass reinforced plastic, impeller passes solids and stringy material without clogging and increases wear resistance when abrasive particles are present.

Features:
• Built-in shaft mounted agitator suspends solids.
• Urethane Semi Vortex Impeller for maximum durability and pump performance.
• Double Inside Mechanical Seal With SiC faces provides longest operational life.
• Oil Lifter provides lubrication of the seal faces. (Patent Pending)
• V-Ring Seal Protector protects mechanical seal from abrasive particles.

The ShinMaywa Norus Series submersible pumps are some of the most reliable and durable pumps sold today and are commonly used in skimmers for waterfalls and water features. On the outside it has a unique corrosion resistant hardware design made of stainless steel and poly amide fiber reinforced resin.   In addition, it features a cast aluminum bearing housing, and a vibration reducing bearing design which provides superior heat dissipation and structural integrity in comparison to competing pumps.  The Norus series pumps are the most reliable, highest efficiency, lowest lifetime cost of any pump in its class.

Feature:
• Designed for continuous use
• Very efficient and durable
• Low operating cost
• Built with corrosion resistant 304 stainless steel and Poly Amide fiber reinforced resin
• Superior corrosion resistance in harsh conditions
• Vortex impeller design
• 1 1/4" Solids handling
• Thermal overload prevents overheating due to a blocked rotor or water starved skimmers

Little Giant's stainless steel and bronze submersible pond pumps are very reliable. Typically used in Koi or goldfish ponds to power filters and waterfalls, they can also be used with mid-size to large fountain nozzles. The S580, S900 and S1200 gph models have a 3/4" MPT intake and a 1/2" MPT outlet that easily accommodates 3/4" flexible tubing. All of these models must have either a screen or foam pre-filter attached to the intake. These pumps can easily be connected to biological filters, ultraviolet sterilizers, ultraviolet clarifiers and in pond filters.

Spirit pond and stream pumps. Energy efficient direct drive pond and stream pumps ideal for use in skimmer. These compact units can be used vertically or horizontally. The new Spirit pumps by EasyPro are made in Italy with quality components for years of reliable service. Three sizes meet the needs of a wide range of pond and stream applications.

• Oil-less design is fish and plant safe
• Triple sealed, 115v motors for maximum life span
• Can be used vertically or horizontally
• Energy efficient direct drive pumps
• Compact size – great for skimmer use
• 1 1/4″ female threaded outlet
• Includes 1 1/4″ x 1 1/2″ threaded elbow
• 16′ power cords

EasyPro TM Series submersible waterfall pumps are perfect for low to medium head streams and waterfalls. Their compact design allows for use in larger skimmers or pump vaults.

• Up to 17,500 GPH flow
• Top quality Japanese double mechanical seals 
• Ideal for low to medium head waterfalls
• Thermal overload protection
  
• 3" FPT outlet
• 30 ft power cord

Matala Geyser Hi-Flow Pumps are ideal for large waterfalls, fountains and water features that require high flows. A slim upright design makes for a perfect fit in skimmers and pondless waterfall vaults. A built-in thermal overload protects the motor from overheating. These are submersible high flow rate pumps and require adequate water depth with unhampered flow to the pump. Water depth should be at least 26" deep at all times. 

• 10 mm hole size in strainer
• Thermal overload protection
• 3" FPT outlet

Geyser Hi-Flow Pumps require a minimum of 15 feet of head pressure to avoid cavitation and amp overload. Water depth should be at least 26" deep at all times. Pump must be submerged at all times.

EasyPro TB Series submersible waterfall pumps are perfect for high head streams and waterfalls. Their compact design and unmatched durability allows for use in large skimmers or pump vaults in continuous duty pond and water feature applications.

• Designed for use with higher head pressure
• Top quality Japanese double mechanical seals
• Thermal overload protection
• 3" FPT outlet
• 20 ft. power cord
• A minimum of 20' head pressure required for TB12000 and TB14500, use ball valve to create back pressure if system has less than 20' head pressure

These submersible trash pumps handle sand, solids, leaves, algae and other debris up to 3/8" x 1" in size. Ideal for waterfalls where algae and leaves are a problem, recirculating systems where solids removal is needed, dewatering applications where sand and sludge are being pumped, or any other dirty or clean water application where a high quality, continuous duty pump is needed.

• Great for pond cleanouts
• 115V
• 2" FPT discharge
• 20' power cord

• Oil-Free, Will Not Contaminate Aquatic Life
• Low Energy Consumption
• Inlet/Outlet:
  • T 1500 : 1" MPT
  • T 4000 : 1 1/2" MPT
  • T 7500, T10000 : 3" MPT

• Engineered for 24 hour continuous use
• Wildlife safe with removable fish/frog guard
• Ability to pass solids up to 1-1/4” in diameter
• Built in thermal overload sensor
• 20' power cord

The Atlantic TUP-Series Submersible Pool Cleanout pump is designed specifically to drain a typical swimming pool or spa. Featuring 316 stainless steel and composite construction it resists chlorine, salt and acid. It's 5-1/2" small diameter fits into most swimming pool drains. A continuous duty motor features double mechanical seals and thermal overload protection. High visibility low water level indicator band shows water level at a distance. The pump also includes a backwash hose adapter fitting, heavy duty top handle and strain relief to protect cord.

• 1/5 HP
• Dimensions: 5-1/2"W x 12-1/2"H
  
• 20' power cord

The Oase AquaMax Eco Expert submersible pond pumps are powerful, energy efficient filtration pumps for demanding filter systems, large waterfalls, and large water features. The robust stainless steel intake screen passes debris particles up to 0.437". Unique patented frost protection safeguards pump from freeze damage down to -4°F. Can be used submerged or in external inline installations in a variety of water types, including chlorinated pool and salt water. Unlike typical direct drive pumps which are susceptible to suction cavitation and pump damage, the AquaMax Eco Expert has no minimum head height for operation.

• Ergonomic handle aligns with the pumps center of gravity
• Integrated mounting holes in the base enable fixed installation
• Rotatable stainless steel intake screen prevents large debris from entering pump
• Seasonal Flow Control (SFC) switch lowers flow and wattage as water cools to 40°F (optional EGC)
  
• Grounding plate safeguards against short circuits