Little Giant Water Pumps

These unique pumps have two outlets enabling easy connection to two different components such as your filter and an ornament. The Little Giant Dual Discharge Pumps are powerful enough to power medium to large waterfalls. Each pump includes a discharge cap, use it in the event that you only need to connect one of the pumps outlets to your tubing.

• Submersible for underwater operation.
• Improved torque produces higher pressure than Mag-Drive pumps.
• 16 ft Cord Length

Constructed with stainless steel, cast iron and durable thermoplastic, this solids handling submersible water feature pump meets the rigorous demands of the most impressive water features.

• Solids Handling Ability
• 19 ft. Power cord

Designed with flexibility in mind, the wet rotor pump can be installed submersed or externally, vertically or horizontally. Created with NPT threads and SPIG fittings built in, this pump can accept various types of fittings/tubing adapters.

• Constructed without the use of mechanical seals or oil
• Rope/Cable Loop on rear of pump for easy deep water installation retrieval
• Modular add-on screen abilities allow you to increase pre-filtration
• Can be used horizontally or vertically
• Inline or submersible use (We recommend submersible use only)
• F10 - F50 models have a 20 ft. Power Cord
• F70 model has a 40 ft. Power Cord

Low Water Shut-Off Switch Sold Separately

• Handles liquid and solid waste materials up to 1/2" diameter solids.
• Epoxy coated cast iron motor housing for corrosion and rust resistance.
• Non-Toxic Oil filled motor housings for lifetime lubrication and rapid heat dissipation.
• Stainless steel screws, bolts, handle and seal assembly
• Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces).
• 1 Year Manufacturer's Warranty on 5-MSPR-WG #505325
  

• Submersible for underwater operation.
• Improved torque produces higher pressure than Mag-Drive pumps.
• 15 ft. Cord Length

Little Giant FP Series Flex Pumps are energy efficient and ideal for powering water features and pond filtration systems. These pumps are rated for continuous duty to operate in the most rigorous applications.

Little Giant FP Series Flex Pumps Feature:

• Submersible in the pond or out of the pond water feature pump
• Ideal for powering water features and pond filter systems
• Heavy duty, stainless steel canned motor for extended pump life
• Clog-resistant design
• Continuous duty rated
• Energy efficient
• 120 Voltz, 60 Hertz

Little GIANT Small Submersible pumps are designed for continous circulation of statuary fountains. Made with some of the industry's most durable materials, our pumps reach peak performance when completely submerged.

• Ideal for continuous circulation, submersible use only
  Specifications:
  • 205 GPH
  • 115V
  • 60HZ
  • 70 Watts

Features and Benefits:
• Epoxy coated cast aluminum construction
• Includes 90 degree elbow
• Pre-screen included for protection
• Oil-filled for cooling

• Submersible for underwater operation.
• Replaceable rotor assembly.
• Designed to operate with minimal energy consumption.
• 15 ft Cord Length

This wet-rotor pump, often referred to as a magnetic-drive pump by other manufacturers, utilizes an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller. The magnet acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor, thus the term 'wet-rotor". It is seal-less and oil-less. This pump works well in water garden, statuary, and some industrial applications. It is compact in design and is the most energy efficient type of pump Little Giant manufactures. The other side of this efficiency is very little starting torque. Therefore, the pump does not produce as much pressure and will not pump water as high as its' epoxy-encapsulated counterpart.

• Built-in flow control
• Bottom intake
• 6 ft. Cord Length