Seaming & Repair Materials

Tite Seal Pond Liner Patch Kit repairs and waterproofs small tears and punctures in EPDM rubber.

The Kit contains everything you need:

• Seals Seams
• Waterproofs
• Repairs
• Use with Tite Seal UltraBond Seam Primer

Ultra Bond SeamPrime is a primer/surface conditioner and adhesive enhancer for self-adhering cover seam tapes, and self-adhering membranes and underlayments. DO NOT USE ON PVC

• Maximize Adhesion
• Enhance Cold Weather Application
• For All Self-Adhesive Construction Tapes & Membranes

Quick Roof UltraClean is a unique non-chlorinated blend of solvents that removes oxidation, grease, oil tree sap, and other contaminants from roof surfaces and other building materials. Non-chlorinated liner cleaner that removes oxidation, grease, oil, tree sap, and other contaminants from EPDM, PVC, and other surfaces.

• Dries Fast
• Leaves no residue
• Non-chlorinated

Self-adhesive pipe boot for sealing around pond liner penetrations. Compatible with 1" to 6" pipes.

Quick, easy to use kit for repairing minor damage to your rubber (EPDM) pond liner.

Firestone PondGard EPDM geomembrane is engineered to provide dependable performance in a variety of critical containment applications.

Based on EPDM (ethylene propylene diene terpolymer) synthetic rubber, PondGard is a highly flexible, stable waterproofing membrane. Specially formulated to be safe for fish and plant life, PondGard can easily be shaped to fit the unique contours of any size pond or complex landscape feature.

3" Quickseam Splice Tape - A rubber polymer tape which has been designed for the splicing of EPDM liners. 3" wide sticky on both sides.

Joint Cover/Liner Patch - A 5 3/4" round, sticky on one side, patch that provides an excellent seal with good adhesion. Used to repair small holes in EPDM liner.

Carlisle Seaming/Repair Tools

• Hand Rollers
• Primer Pads
• Primer Pad Hand Blocks

Firestone PondGard EPDM geomembrane is engineered to provide dependable performance in a variety of critical containment applications.

Based on EPDM (ethylene propylene diene terpolymer) synthetic rubber, PondGard is a highly flexible, stable waterproofing membrane. Specially formulated to be safe for fish and plant life, PondGard can easily be shaped to fit the unique contours of any size pond or complex landscape feature.

6" Quickseam Cover Tape - Used to seam two sheets of liner together or to protect the edge of a seam created with 3" wide tape. 6" wide sticky on one side.

Joint Cover/Liner Patch - A 5 3/4" round, sticky on one side, patch that provides an excellent seal with good adhesion. Used to repair small holes in EPDM liner.

A clean, easy, safe way to create larger panels to cover a greater surface area. Environmentally friendly, and creates strong seams.

Kit Contents
• 1 Roll - Quickseam Splice Tape - 3" x 25'
• 1 pt Can - Single-Ply LVOC Primer
• 1 QuickScrubber Handle
• 1 QuickScrubber Pad
• 1 Seam Roller
• 1 Special Crayon
• Instructions

Firestone QuickPrime Plus LVOC is designed to clean and prime approved Firestone membranes prior to application of QuickSeam products where required by Firestone Specialty Products specifications and details. It may also be used to clean membrane prior to the application of Lap Sealant LVOC. It is formulated to meet V.O.C. requirements of 250 g/L (2.13 lb/gal) maximum.

Call For Pricing & Availability

QuickScrubber Plus primer application system consists of a scrub pad and holder that allows application of QuickPrime™ Plus from a standing position. The QuickScrubber Plus scrub pad is secured in place to the bottom of the holder and has a threaded fitting to accept an extension handle (handle not included).

One pad for the QuickScrubber Plus system is included with each kit.

The bottom-bearing surface of the QuickScrubber Plus holder is slightly concave. When proper pressure is applied, the handle flattens out assuring that proper pressure is maintained.

• Each pad will prime about 100-200 ft. Long x 6"-7" Wide area.
• Pads can not be turned over or re-used
• Pads must be kept clean & dry prior to use
• Will accept a standard broom/mop handle

A 6" self-adhesive water-tight patch that seals accidental holes in EPDM liner.

Double sided tape used for seaming rubber liner. For best results use EPDM Tape Primer.

Single sided tape used for seaming and repairing rubber liner.

QuickPrime Plus EPDM Liner Seaming Tape Primer is used to help clean and prime EPDM liner prior to making a seam. When making liner repairs and seaming multiple pieces of liner, it is important to prep the liner properly so that you do not run into issues down the line. The easy-to-use Firestone QuickPrime Plus provides the perfect primer for completing the task, forming a proper seal that ensures years of trouble-free use.

• Cleans and primes EPDM liner
• Ideal for making seams in EPDM liner
• Helps form a proper seam
• Easy to use
• Professional grade

Call For Pricing & Availability

• Ensure that the liner is free of mud or other contaminants prior to the application of the primer.
• Once the EPDM liner is dry, pour a small amount of the primer onto the area that requires patching. Always wear gloves when applying primer.
• Apply the primer to the patch area using the scrubber pad.
• Allow the primer to become tacky prior to applying the patch.
• Peel off the paper backing from the patch and apply to the damaged area of the liner
• Roll the patch evenly ensuring that all areas are free of blisters. Allow the primer to completely bond prior to exposing the patch of water.

Kit includes:
• Two 6″ x 6″ patches
• 2 fl. oz. bottle of primer
• FSRP seam roller
• Scrubber pad
• Disposable gloves

EasyPro Liner Double Sided Seaming Tape