Test Kits

A complete kit for testing pond water. Product conducts over 500 tests, and is compact and convenient for easy home storage with 6 bottles of liquid test reagent, laminated color cards, 4 glass test tubes, and a complete step-by-step instructional booklet.

Includes: pH, Ammonia, Nitrite and Phosphate tests

Sensitive and accurate test kit for measuring KH and/or alkalinity concentrations in ponds and aquariums. The Aquascape KH/Alkalinity Test Kit provides laboratory quality testing that is simple and easy to use. Carbonate hardness or KH and/or alkalinity have an intricate relationship with pH, calcium, and the buffering capacity of pond or aquarium water. It is also important for determining or optimizing the effect of the Aquascape IonGen System.

Allows you to easily TRACK critical WATER QUALITY parameters with 1 TEST:

• Nitrate
• Nitrite
• Total Hardness
• Total Alkalinity
• pH

Fresh Water Use

Water MUST be tested regularly to maintain GOOD WATER QUALITY

1 Bottle Contains 50 Test Strips

Tests for ammonia levels in water. Fish continually release ammonia through their gills, urine and solid waste. Uneaten food and decaying organic matter also add ammonia to the water. Even small amounts of ammonia stress fish, and large amounts will cause fish loss. Use this kit to easily and accurately measure the ammonia level in your water so that you can take the necessary steps to remove ammonia and keep your fish healthy.

2 liquid dropper bottles with child-resistant safety caps, easy-to-read instructions with information on how to test and how to correct unsafe water conditions, 2 color charts and glass test tube with snap-tight cap.

Phosphate can enter the aquarium through tap water, fish waste, and decaying organics such as uneaten food and dead algae. Excess phosphate contributes to unsightly algae and green water blooms. In saltwater, excess phosphate can inhibit the growth of hard corals.

Kit contains:
• 2 bottles of liquid test reagent
• 2 laminated, computer calibrated color cards
• Glass test tube with snap-tight cap
• Step by step instructions and information on how to correct unsafe conditions.

Sensitive and accurate test kit for measuring dissolved or chelated copper concentrations in ponds and aquariums. The Aquascape Cu/Copper Test Kit provides laboratory quality testing that is simple and easy to use. Copper is often used as a medication or pond treatment. The Aquascape Cu/Copper Test Kit is also ideal for testing tap or source water for copper. For use in ponds, marine and freshwater aquariums.

Quickly and accurately evaluates water quality, allowing for detection of minor pH changes and the avoidance of major problems. pH levels are affected by fish waste, rainwater runoff, organic waste, the mineral content of tap water, and a drop in oxygen levels.

• Dropper bottle for accurate dispensing of test solution.
• Easy-to-read instructions and color chart.
• Non-staining glass tube with snap-tight cap.

High nitrate in aquarium water is associated with algae growth, a built-up of organic pollutants and poor fish health. Use this kit to measure nitrate so that, if detected, steps can be taken to remove it.

2 liquid droppers with child-resistant safety caps, easy-to-read instructions with information on how to test and how to correct unsafe water conditions, 2 color charts and glass test tube with snap-tight cap.

KH is imperative to a pond's pH balance, as it is the “usable part of your pH”. It doesn’t matter too much to the fish when pH is going UP. But they will leave home when it suddenly drops DOWN! When your pond runs low on KH, which should be 100-300 ppm, the pH becomes unstable and can crash. If it goes down to 80 ppm, nitrification stops and pH becomes unstable. The natural biological ammonia removal process is referred to as nitrification, which:

Includes:

• Test Tube
• Test Solution
• Conversion Chart