Waterfall Foam & Adhesives

Use Handi-Foam Sealants to simplify waterfall construction. Spray under and around stones in your waterfall/stream to create a water resistant barrier. Once dry, water flow is redirected over the installed stones for more dramatic waterfalls.

Handi-FoamŪ Sealants are designed to seal and fill small cracks, gaps and voids. Handi-Foam sealants can be applied with a straw applicator, a professional dispensing unit or a professional hose kit (for use with cylinders). Handi-Foam Sealants are available in a variety of sizes to meet many application needs. This results in less waste on small jobs while having an economic impact on large jobs.

Handi-Foam Sealants cure when ambient moisture/humidity in the air reacts with the foam sealant creating a rigid, closed cell barrier against drafts, noise, moisture and air infiltration. Handi-Foam Sealants are tack free within 10 minutes and meet ASTM E84 Class 1 for caulk and sealants. Handi-Foam Sealants are the perfect chioice for your sealing needs, and are available in Fireblock, black and standard formulations.

• Faster and easier than mortar
• Expands to fill gaps and voids
• Nozzle adapter and/or applicator gun reaches into tight spaces
• Fish-safe when cured
• Dries tack-free in approx. 10 minutes, cures in 24 hours

FallsFoam, an expandable black waterfall foam available in 12 oz. and 29 oz. cans, stabilizes stones and fills voids. 

Use to fill in cracks between rocks to prevent water from being"lost" over the waterfall

• Improves water flow visually and black color hides foam in the shadows of the rocks.
• Hand foam cans have a patented trigger system which allows multiple uses.
• Trigger will dispense foam in any position.
• Fish safe, non toxic formula.
• BWFN is minimal expanding foam - fills in cracks with less trimming of excess foam.
• 29 ounce gun foam also available for high volume users, use with foam guns, cleaner should be used any time the can is removed and left off - this will remove any uncured foam from inside the gun.

Laguna Black Waterfall Foam is a moisture-cured sealant used to fill, seal, and bond. It's ideal for use when constructing a pond and/or waterfalls and naturally blends in with the pond setting. Use it to bond rocks to spillways and to direct water over the falls. Waterfall Foam quickly bonds to most construction materials. It dries tack-free in approximately 5 minutes, is cuttable within 1 hour and cures in 12-24 hours. After it cures, it can be sanded or trimmed. The foam is fish-safe & UV-protected. Use when air temperature is between 65° F - 80° F (18° C-27° C)

Key Features:

• Water-resistant
• Expands to fill gaps or make seals
• Bonds rocks together
• Nozzle adaptor reaches into tight spaces
• UV-resistant
• Fish-safe once dried
• Dries tack-free in 5 minutes, cures in less than 24 hours

Professional dispensing units for polyurethane foam sealants and adhesives.

• Adjustable bead control
• Durable construction
• Solvent resistant

Allows precision dispersion of expanding black foam for sealing waterfalls. For use with Professional Black Waterfall Foam - 24 oz.

Flushes foam guns clean and removes uncured foam.

Ideal for use with Aquascape Economy Foam Gun and Professional Foam Gun applicators.

Multipurpose Handi-Cleaner is a spray solvent used to dissolve uncured foam. Handi-Cleaner can also be attached to any of Fomo's sealant dispensing units, allowing the unit to be flushed and kept clean and operable. Handi-Cleaner may also be used for other industrial cleaning purposes.

Includes everything needed for precision dispersion of expanding black foam for sealing waterfalls. Durable, custom-fit toolbox includes:

Use to seal roof joints (seams) and tears, copings, flashings, skylights, gutters, etc. Perfect for repairing and restoring roofs of residential and commercial buildings, mobile homes & RVs.

Bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, most PVC, SBS, APP, BURs, metal roofs, tiles, shingle, aluminum, galvanized steel, wood, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Paintable Seam Tape is used as part of the waterproof system with Liquid Rubber Coatings

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Flexible Heavy-Duty Coating
• Multi-Purpose coating that cures into a waterproof membrane
• Used for roofs, RV's, gutters, planters, foundations, ponds....
• Excellent adhesion, chemical and UV resistance
• Flexible and resistant to freeze/thaw cycles
• Water based " No harmful solvents or VOC's
• Colored version sticks great to EPDM

Steps
• Ensure a clean, dry surface
• Bridge any joints, seams, venting, cracks... with Seam Tape
• Build up your coats to achieve required thickness.

Tips
• Avoid hot, direct sun when applying.
• Product stays soft, flexible and may have some tackiness, not meant as a walking surface.
• You can re-coat when it's dry to touch and make sure there is no uncured material underneath.
• Apply material until you use up the required amount.
• For larger areas, pour out and spread around with a roller or squeegee.
• If corrosion is present, use MetalSafe Sealant.

Several advantages including:
• High Quality Weather Resistant Adhesive.
• Durable does not crack, shrink or chalk.
• Well suited for non-porous materials.

Aquascape Silicone Sealant

Used for sealing connections where the liner attaches to the BioFalls Filter snout and the skimmer faceplate.

Aquascape Christy's Red Hot Blue Glue PVC Pipe Cement is the original all-weather, wet or dry PVC cement. It is combination glue and primer for flexible PVC.

• Easy & Effective make your pipe connections water tight
• 1/2" wide
• 520' roll

Savio Black Foam is a convenient black colored foam that bonds to most construction materials. This formulation is closed cell and won't age, harden or shrink. It is perfect for filling and sealing holes and voids for outside applications.

Expands to Fill joints

• Easy Application - Simple shake, point, squeeze and fill
• Multi Purpose - Use for a variety of applications
• Durable - Resists water & weather