All De-Icers

• Maintains a vent hole in the pond for proper gas exchange, saving the lives of your fish
• Safe for plastic and liner ponds
• LED light glows when de-icer is on
• 315 watt heating element melts snow on contact
• Thermostatically controlled to operate only when necessary
• 22 ft. power cord

The Laguna 500 watt Power Heat Deicer will keep an area thawed and open in the pond during the cold winter months, allowing the release of toxic gases from fish respiration and decomposing organic matter to escape. At the same time it allows oxygen to re-enter the pond. Safe for plastic and liner ponds, the pond de-icer will not harm fish or plants. The heater has dual zone integrated thermostats to help the heat distribution. 

• Dual zone integrated thermostats
• Stainless steel housing for even heat distribution and corrosion resistance
• Maintains a vent hole in the pond for proper gas exchange
• Safe for plastic and liner ponds
• LED light glows red when de-icer is on
• 22 ft power cord

Aquascape stainless steel Pond De-Icer is ideal for keeping a small hole opening the ice during cold winter months, and ensures proper gas exchange helping keep fish alive during the winter.

• Stainless steel construction prevents corrosion and cracking
• Integrated thermostat saves electricity
• Built-in LED light indicates when heater is in use
• 22 ft power cord
  

The PondMaster Floating Winter Pond De-Icer is for use in those colder locations where typical winter temperatures result in significant or long-term icing of pond surfaces. The unique doughnut-shaped design maintains an ice-free center area that allows the accumulated toxic gases to escape from the trapped pond water thus promoting a healthier environment for aquatic and plant life.

• 120 Watts of Heating Power, Extremely Energy Efficient
• Internal Electronics Epoxy-Sealed for Extra Watertight Protection
• Double Watertight Seal
• Weather-Resistant
• Will Not Harm Flexible Liners or Pre-Formed Ponds
• Made From Rugged, High Impact ABS Plastic
• Thermostatically controlled to operate only when necessary, saving you money
• 1 Year Manufacturer's Warranty

The Atlantic Pond De-icer helps maintain a hole in ice to allow the exchange of oxygen and other gases in wintery conditions. It allows oxygen to diffuse into pond water otherwise sealed off by ice, while toxic carbon dixode and methane from decomposing organics diffuse out.

• Constructed of high strength and high temperature PPS polymer for incredible durabilty under the most adverse conditions
• Internal thermostat turns heater on just above freezing and off as water warms for fully automatic operation
• Efficient heating element only draws 300 watts when needed to keep operating costs low
• Indicator light shines blue to show the De-icer is in standby mode when plugged in with water temperature above freezing
• Indicator light shines green to show water temperature is below freezing and De-icer is in operation.

Toxic gases caused by decaying matter and fish waste can become trapped under the ice. TetraPond® De-Icer keeps an area of the pond ice-free.

• Maintains a vent hole in the pond for proper gas exchange, saving the lives of your fish
• Effective to -20°F (-18°C)
• Natural stone finish blends with your pond's surroundings
• Thermostatically controlled to operate only when necessary, saving you money

Kasco De-Icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Use de-icers year-round for improved health and beauty of your water. Available in 1/2, 3/4, and 1 HP unit sizes.

• Offered as 110-120V and 208-240V (60Hz)
• Includes (2) 20 ft. mooring lines for suspended operation

Optional: Universal Mount - allows de-icer to be mounted on docks, pilings and other waterfront property. Featuring durable stainless steel, this easy to assemble and install mount allows units to be lowered, angled and positioned in several orientations to provide proper water movement. Uses a 1" nominal threaded or unthreaded pipe (supplied by customer).