Scott Aerator De-icers

The Scott Aerator Floating De-Icer is designed to keep large water surface areas open in the winter. Suspended from a float approximately 2 feet below the water's surface, it removes and prevents ice by bringing warmer water from the bottom and sending it out in a continuous agitated movement. The Floating De-Icer easily adjusts for variations in water levels, and its rugged engineering is perfect for both fresh and salt water.

• 400 gallons-per-minute flow rate.
• Oil-free, environmentally friendly motor means no oil leaks!
• Rugged, high-density polyurethane-and-stainless steel construction.
• Motor specs: 115 volts, 60 Hz, single phase, 10 amps, 680 watts. We also have 230-volt, many variations of 3-phase, and 50-Hz models available.
• 12-gauge, submersible, 35-foot, heavy-duty power cord with Hubbell marine plug included.

A heavy-duty, stainless steel dock plate, pipe, and yoke assembly suspend the Scott Aerator Dock Mount De-Icer under the water’s surface. It mounts quickly and easily to almost any type of dock, and can easily be adjusted to accommodate different water levels. The Dock Mount De-Icer keeps ice from forming by bringing warmer water from the bottom and sending it out in a continuous agitated movement. This helps prevent dock pilings from being jacked, or lifted, by acting as a buffer to prevent ice expansion and pressure damage.

• 400 gallons-per-minute flow rate.
• Oil-free, environmentally friendly motor means no oil leaks!
• Rugged, high-density polyurethane-and-stainless steel construction.
• Motor specs: 115 volts, 60 Hz, single phase, 10 amps, 680 watts. We also have 230-volt, many variations of 3-phase and 50-Hz models available.
• 12-gauge, submersible, 25-foot power cord with rugged Hubbell marine style plug included.
• 7 feet in length, 55 pounds.

The Scott Aerator Slinger De-Icer can be suspended from a boat, pilings or dock by using nylon ropes (included) to fasten. This de-icer removes and prevents ice by bringing warmer water from the bottom and sending it out in a continuous agitated movement. It easily adjusts to compensate for varying water levels, and its heavy-duty design holds up in fresh and salt waters. Made for use in hard-to-reach areas and rapidly changing conditions, it's an economical solution to ice formation in large marinas and dock areas.

• 400 gallons-per-minute flow rate.
• Oil-free, environmentally friendly motor means no oil leaks!
• Rugged, high-density polyurethane-and-stainless steel construction.
• Motor specs: 115-volt, 60 Hz, single phase, 10 amps, 680 watts. We also have 230-volt, many variations of 3-phase, and 50-Hz models available.
• 12-gauge, heavy-duty submersible electric cord with Hubbell marine-grade plug included.