Matala Koi Clear Vortex Filter V-105
The Matala Koi Clear Vortex Filter offers exceptional versatility and efficiency for heavily stocked koi ponds up to 5,300 gallons. With its modular design and state-of-the-art progressive filtration technology, it provides effective filtration in various applications. Whether used as a standalone vortex filter or combined with additional units for a multi-chamber setup, the Koi Clear system offers easy installation and simple maintenance, making it an ideal choice for pond owners seeking reliable water quality management.
- Tank and lid only
- Dimensions: 42"D x 40"H. Tank tapers to an approx. 16" x 16" square bottom
- Holds approximately 150 gallons volume
- Versatile and modular design
- Several tanks can be applied as modules in a multi-chamber filter
- Very resistant to clogging
Note: Stand, Bulkheads, Media & Fittings are all sold Separately. The tank has no holes drilled in it.
-
One inlet from the pump or from the pond to feed water to the filter.
- If gravity flow to the filter you will need a 3” or 4” inlet. A single 4” pipe can handle up to 3500 GPH by gravity flow to the filter. A single 3” pipe can handle only 1800 GPH by gravity flow.
- If pumping to the filter you will need a 2” inlet.
-
One outlet returns water to the pond.
- If gravity flow back to the pond you will need a 4” outlet. If the return to pond is gravity flow, you can increase flow rate to 4000 GPH only if your 4” pipe is less than 5 feet and draining downhill.
- If pumping back to the pond you will need a 2” outlet. * See above flow rates.
-
One drain to clean out the dirty water from bottom of filter tank.
- If the bottom of the Koi Clear is above grade or in a position where it can drain downhill then you can use a 2" or 3" drain fitting with a ball valve or gate valve on outside. Just open the valve and the dirty water will drain downhill.
- If the bottom of Koi Clear is below grade or in a position where it cannot drain downhill then you must use a pump in the bottom of the Koi Clear to pump out the waste. In many cases you can install the sludge pump permanently at the bottom of the Koi Clear and just plug it in to pump out the waste. The pipe from the sludge pump should rise above the water level so that you do not have a leak when sludge pump is not in use.
Shipping Notice: This item is oversized and has a $340 shipping surcharge.
Matala Koi Clear Vortex Filter V-105 Overview
Matala Koi Clear Vortex Filter V-105
Icons | SKU | Includes | Add | |
---|---|---|---|---|
Matala Koi Clear Vortex Filter V-105 $598.00 $461.00 | 1,153 Points |
KC105 |
Tank and lid only |
||
$1,125.00 $866.00 | 2,165 Points |
KC105C |
Tank and lid w/ 3 layers of Matala media |
Matala Koi Clear Vortex Filter V-105
Icons | SKU | Add | |
---|---|---|---|
$391.00 $301.00 | 753 Points |
KCS |
This item is oversized and has a $340 shipping surcharge.
This item is oversized and has a $180 shipping surcharge.