Pump Accessories

The Little Giant Mechanical Pump Float Switch is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps. Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps.

Little Giant Mechanical Pump Float Switch Features:

• Convert any manual pump to an automatic pump, up through 3/4 HP or 2 HP with 15 max run amps to automatic operation
• Suitable for use in water and sewage applications
• Heavy duty
• Small enough to operate when space is limited
• Epoxy sealed switch and cord conductors
• 115 / 230 Volts
• 20 ft. Power Cord

The Little Giant Pump Cut-Off Switch is perfect for mounting inside of your skimmer to protect your pump from running dry in a low water situation.

• 115 Volt Low Water Shut-off Switch
• Automatically turns off pump after skimmer door is closed and the water level drops below the skimmer basin
• Automatically turns off pump if skimmer water level drops due to dirty or clogged filter media
• Piggy-back plug for easy installation
• 18 ft. cord length

Aquascape 3" Dual Union Check Valve is perfect for larger installations that use large pumps and filters. Heavy-duty, dual union design ensures years of trouble-free use.

The Triton Check Valve is a "swing style" check valve, featuring a 2" socket union on the inlet, 2" or 1½" socket unions for the outlet, a molded in 90 elbow, and a slim design that allows clearance when installed with direct drive pumps. This check valve can work on any 1½" or 2" pump outlet.

• Triton discharge pipe has molded "perfect-cut" dimensions to identify proper lengths for Atlantic products and cut-to-fit 1'' increments on the reverse side.
• Works with all 1½'' and 2'' pump outlets
• Maximum assembled height of 17'' (from the pump discharge to the center of the outlet pipe)
• Can be extended to any length using 2'' sch 40 fittings.
• Includes: 2'' check valve with unions, 1½'' outlet fitting, 1" thru 1½" tubing adapter, discharge pipe and extension.

These check valve assemblies are used inside Pro-Series skimmers to bring the flow of water from the pump up to the outlet hole in the back wall of the skimmer. In an ideal world all pumps would have their outlet at the same height but that is not the case so various height assemblies are needed. Each assembly includes a check valve which keeps the plumbing line full of water even when the pump is off. Please see chart below for the correct pump/skimmer check valve. 

CVA20TH is for TH series pumps in PSA5000, PSA7000, PS1V or PS1FB skimmers and JAFM, JAFL or PV60E vaults

EasyPro Pump Pro-Tector

• Protect against plugging by creating a large surface area around the pump.
• Designed to fit all brands of small pumps.
• Has a polyester filter media pad inside of a nylon mesh bag.
• Drawstring top with push button release keep the top closed around the pump yet makes for easy pump removal.

Pump Defenders are designed to protect your submersible water pumps from clogging with debris.

The pump sits inside a basket of green density Matala and then wrapped in a nylon bag with drawstring.

Heavy debris is filtered out before it reaches the intake of the pump, thereby reducing maintenance and extending the life of the pump.

• Protects against plugging.
• Creats large surface area.
• Designed to fit most brands.
• Draw string keeps top closed.
• Blue or Green Matala media.

Prevents pump damage and flow reduction due to debris and clogs. Expandable units available in single or double Matala filter media core for superior biological filtration. Universal barbed fittings accept 1", 1-1/4”, 1-1/2" tubing or 1-1/2" MPT. The EZ Bio Filter can be used as a biomechanical pre-filter for circulation pumps, filtration pumps, and water fountain pumps.

• Improved pump efficiency: prevents premature clogging.
• Highly efficient filtration: progressive 2 stage filtration.
• Ez install: 1.5" connector plus flexible tube adapter.
• Ez clean: minimal maintenance, ez cleaning.
• Ez integration: can be extended with multiple sections.
• Tubing Adapter: Accepts 1", 1 1/4' & 1 1/2" ID tubing